FAQs Testimonials E-catalog FAQs Testimonials Catalog
:: PRODUCT SEARCH
:: SUBSCRIBE US

Enter email address

MAGNETIC TREATMENT OF SEWAGE WATERS

1. Mechanism of Magnetic Field Impact on Water Dispersed Systems

Alterations of physical and chemical properties of water-dispersed systems in the mode of magnetic treatment imply a certain influence of magnetic field on the structure of water and aqueous solutions alike. Hydration of salt ions and other impurities slides down and improves technological characteristics of the water treated by magnetic field, i.e. better salt solubility, kinetic changes in salt crystallization, accelerated coagulation, etc. Water structural modifications induced by magnetic treatment have been endorsed by a many-year research of different scientific societies in Russia, United States, Belgium, Canada and others.

The research has revealed the evidence that all structural changes of water dispersed systems treated by magnetic field have to do with the ions of substances present in the water, colloidal particles of considerable magnetic susceptibility and water changes, to boot.

One can get the smattering of magnetic field effects on water dispersed systems to a certain extent, if proceed from the theory that links structural changes of water dispersed systems to ion formation. According to this theory, the magnetic field affects the ions making their way through it and brings about the Lorentz forces, which can be calculated by way of the following equation:

F = K · q · v · H · sin a , (1)

given that,
K - coefficient of proportionality;
q - ion charge;
v - ion velocity;
H - magnetic field strength;
a - angle of magnetic field direction with the ion flow.

The equation (1) shows that the Lorentz forces intensify with the growth of ion charge, magnetic field strength, flow velocity and perpendicularity of ions crossing magnetic field lines. The Lorentz forces act on positively and negatively charged ions (cations and anions) and make them diverge in opposite directions.

It is known that magnetic field energy E per volume unit can be described in the following manner:

E = µ H 2 / 2, (2)

given that,
µ - magnetic susceptibility of the medium.

For ions of short radius (Ca + , Mg + , Li, etc.) E is greater than 0. This is in conformity with the adhesion pattern of closest molecules (positive hydration). Ions of long radius (Cs, K, Cl, Br, etc.) have
E < 0 (negative hydration). Water molecules prove to be more mobile when next to such ions. Therefore, on falling into the water the ion is hydrated and alters the translation motion of the nearest water molecule.

Impurity ions may be a part of translation travel independent of solution molecules and in their presence. Translation movement is a galloping motion of particles. A change of translation motion in the liquid corresponds to a change of mean number of local discharges in the liquid. This will lead to a shift in liquid alkalinity.

Fig. 1 shows a typical graph of ( V' - V)/ V - ion concentration (CaCl 2 , KCl, MgCl 2 ) with V' being density of aqueous solution in the mode of magnetic treatment and V - same for usual water.

As is seen, ( V'- V)/ V rises as the ion concentration increases. However, from 30 mg-eqv./l onwards the growth of ( V- V)/ V as a concentration fraction retards.

Relation between cacl2, kcl, mgcl2
Fig. 1. Relation between ( V' - V)/ V and ion concentration of CaCl 2 (1), KCl (2) and MgCl 2 (3)

Fig. 1 shows a typical graph of ( V' - V)/ V - ion concentration (CaCl 2 , KCl, MgCl 2 ) with V' being density of aqueous solution in the mode of magnetic treatment and V - same for usual water.

As is seen, ( V'- V)/ V rises as the ion concentration increases. However, from 30 mg-eqv./l onwards the growth of ( V- V)/ V as a concentration fraction retards.

 

When making the treatment of water dispersed systems by outward magnetic field, precession of individual electron shells and polarization of electron clouds in molecules occurs. So, the latter gains induced magnetic moment anti-parallel to outside magnetic field. Against the backdrop of these developments, the energy of hydrogen bonding undergoes changes. The bonds are "bent" and partially broken which causes re-alignment of molecules and, therefore, alterations of water structure. This also brings about changes in density, surface tension, viscosity and other water properties when treated by magnetic field.

Polarization of electron clouds intensifies as the strength of magnetic field outside grows. At the same time, deformations in hydrogen bonds go up with a larger amount of molecules, which have shifted from the equilibrium state in the lattice points out to fill the voids. As a result, the density of water builds up.

Naturally, the magnetic field deforms, first and foremost, weaker and "long" bonds.

A relative number of strong bonds between water molecules increase. The kinetic energy of water molecule oscillations near temporary equilibrium at magnetic treatment does not change (constant temperature). A rise in the relative amount of strong bonds between molecules causes reduction of ionic water product. However, the structure formed during motion in magnetic field cannot be stable. On exiting the scope of magnetic field, this structure tends to regain its former condition that shows a minimum of energy and a maximum of hydrogen bonds between molecules in specific environment.

Distillated water has equal molecules and, consequently, observed differences of physical properties prior to and following magnetic treatment are quite insignificant and depend weakly OJH the magnetic field strength. Adding salts and rising charged ions upsets the water structure to a greater extent as the solution concentration thickens. In this case, the cation force fields pull the electron pairs away from the nearest water molecule oxygen, which results in an additional layer of eight electrons around the cations. In other words, free electric levels in the cations are filled making the latter more or less bonded with water molecules, which reside next to the ion (close hydration). The structure of water molecules is tampered with not only in the adjacent layers but also in those next to the hydrated ion owing to polarization.

Water structure changes set off by addition of dissolved substances (impurities) can be of different degree and are dependent upon the value and nature of charge distribution in ions (particles), their sizes, configuration and other reasons. Impurities enter the voids of the water hexagonal cage with stabilizing or destroying effects subject to the size of additives. That is why both the structure and properties of water dispersed systems hinge upon the nature of dispersed phase, concentration, temperature, etc.

When magnetic field is applied from outside, water dispersed systems have precession of individual shells of the particles present in the water. It also initiates polarization of electron clouds in water molecules. However, unlike pure water with nearly same precession in identical atoms because of equality of all molecules, identical atoms do not precede at the same interval in solutions. This is caused by diversified polarization of molecules by ion electric fields. There is also a different shift of electric shells of water molecules that envelop the ions.

By varying the density of electron clouds of both ions and water molecules, magnetic field alters the structure of water dispersed systems, interaction energy between ions and water molecules around the ions, close hydration and molecular polarization in the layers abutting on the ions (remote hydration). By and large, magnetic field changes the structure of water-dispersed system to a certain degree.

Hence it follows that outward magnetic field has a particular impact on the ion hydration. The latter is the major factor that determines the condition of phase separation boundaries and structural transformations in a water dispersed system.

Magnetic field is known to create the asymmetry of hydrated shells due to its effects on water molecules situated around the ion (near and far). Likewise, magnetic field weakens the bonds between certain ions with subsequent bonding amplification of others. These changes result in conditions for ionic associates or crystal embryos. The reversal of magnetic flux and, consequently, modified direction of ion movements greatly facilitate the formation of ion pairs and more sophisticated aggregates. This can be attributed to a higher probability of attracting particles to close with one another.

The theory of magnetic field impact on technological processes for water treatment falls into two main chapters: crystallization at magnetic water preparation and impurity coagulation in water systems.

Crystallization is the formation of crystals when a substance enters a transition phase from less stable thermodynamic state into more steadfast condition.

Equal chemical potentials are the principal consideration for thermodynamic phase equilibrium:

x k = x c , (3)

where,
- substance potential in crystalline condition;
x c - sam x ke substance potential in solution.

Equilibrium departure is the thermodynamic driving force of crystallization. When x c - x k > 0 , there is a crystal formation and growth. For x c - x k < 0 , decrystallization occurs.

A number of crystalline aggregates formed per unit of volume/time shall be computed with the following equation:

, (4)

given that,
- density of atoms in a crystal;
- a number of particles in embryo's surface layer;

Z - probability of adding one particle to the crystal embryo per unit of time;
n - a number of particles in embryo's surface layer;
A - height of potential barrier to be cleared by the system for formation of viable embryo;
K - Boltzmann's constant;
T - absolute temperature.

For spherical embryo:

, (5)

given that,
- specific volume per one particle in a crystal;
- specific free energy of separation surface.

Solution supersaturation is a prerequisite for crystallization. A crystallization embryo is the outcome of phase transformations.

The following requirements are to be matched to secure spontaneous crystallization in a supersaturated solution:
1. Local enhanced concentration of substance molecules or ions with little kinetic energy.
2. The order of molecules or ions in compliance with their positions in the crystal lattice of a crystallized substance.

Given appropriate conditions, it may be expected that molecules or ions clash and set up short chains or flat molecular layers. Once the attractive force exceeds the one of repulsion, a crystal embryo is generated as an elementary particle of solids. The stability of a particle is directly related to its size. For the size in excess of the critical one, the expenditure of energy for the particle to grow would be at the lowest and in the process of constant enlargement. In case of the size less than the critical dimensions, destruction is most likely to take place. As a rule, the following pattern is observed: the more supersaturation, the less activity involved in generation of a critical embryo, the smaller embryo size and faster rates of formation. The speed of embryo birth is an exponential function of supersaturation degree, which vanishes at:

, (6)

The crystallization rate is positively affected by exposure to microgroups of a new phase, which accelerate their growth to the size of stable embryos. The embryo birth and crystallization degree also depend on electric interaction between particles when the work required for embryo formation can be significantly reduced.

Magnetic field causes formation of crystal microembryos in supersaturated aqueous solutions and, therefore, influences immensely the nature of crystallization. In this particular case, the embryos are more plentiful in number and are of smaller sizes than those in the solutions untreated by magnetic field. Furthermore, magnetic field will shorten a magnetic period of crystallization and will allow for an earlier isolation of solid phase. These changes are predominantly linked to the direct impact of magnetic field on impurity ions. The forces acting on the ions of unlike charges are opposite in direction and will induce opposite ion motions when the aqueous solution is in transit of magnetic field.

The radius of ion movement around the force lines of magnetic field is subject to the ion weight and the Lorentz force. At the same time, the radius of ion orbit is dependent upon the magnetic field strength and the velocity of water solution passing through it.

In some cases, the radius is small enough to set off ion fluctuation. For instance, at the magnetic field strength H = 80 kA/m and the flow rate 1-3 m/s the circumference radius of calcium and sulphate ions are ~0/17 and ~0.04 mcm, respectively.

Despite negligible action of the Lorentz force, there is quite a considerable change in the nature of ion movement whereas the fluctuation of ion concentration caused by the latter is fairly noticeable. The distribution of ion concentration along the cross-section of the flow perpendicular to magnetic force lines can be defined by the equation:

, (7)

given that,
C - concentration of ions;
- electric conductivity of solution;
B o - magnetic field induction;
k - constant;
- mean velocity of solution movement;
Ha - Hartman number;

- viscosity of solution;
z - coordinate of the field direction;
a - flow half-width.

The edges of magnetic field present the highest probability for ion associations. It happens due to severe nonuniformity of magnetic field in its marginal areas, which favours the wave formation and the travel of ions in the direction of wave propagation. In the meantime, there will be electric field oscillations in the boundary conjugates that are likely to lead to additional fluctuations of ion concentration.

Direct effects of magnetic field on impurity ions in the water cause changes in the structure of the water system proper.

In particular, magnetic field facilitates an activation hurdle and makes it easier to yield calcium hexaqua complexes [Ca(OH 2 O) 5 ] 2+ and large meta-stable complexes {[Ca(H 2 0) 5 ]20H 2 0} 2+ .

Stabilization of clustered water structures by a calcium hexaqua complex with application of magnetic field promotes the formation of extra crystallization centres in the water. Short of hexaqua complex instability, its existence is rather long. The degree of order of water structures influenced by magnetic field reduces remote ion hydration and, hence, has a favourable impact on adsorption, coagulation, etc.

Coagulation may proceed much faster if there is a hard surface in the solution since the energy required for crystal growth is much less than that needed for the birth of embryo in the solution. Crystallization takes place on the crystal surface of any given or isomorphous substance as long as the surface is capable of adsorbing the molecules or ions present in the solution. Initially, there is an adsorptive layer, which gradually builds up and, ultimately, turns into a layer of the crystalline substance.

Silica particles (for readily soluble salts) and ferrous compounds, which occur in the water as colloids are used to seed crystallization in the water when magnetic treatment is applied. Colloidal'particles of ferromagnetic iron oxides, such as magnetites, present in the water may coagulate by the action of both magnetic attraction and pandemotor forces that speed up mutual attraction of the particles. Newly bom particles of the size in excess of crystal particles will adsorb molecules or ions from the solution and serve as a basis for crystallization.

Colloidal centers may be activated by magnetic field with subsequent effects on the growth kinetics of hardness salt crystals. It has been found now that this phenomenon is a polyextreme function of magnetic field strength and an extreme function of water flow rate. Besides, it has also been established that after magnetic treatment of calcium bicarbonate solution, the formation of crystallization centers is more active than under usual crystallization conditions.

Coagulation is the adherence of particles to one another in dispersed systems and, especially, colloidal dispersion. This process reduces particles of a dispersed system and increases their weight. Coagulation happens under the action of molecular forces on collision of particles as a result of Brownian motion or some exterior factors. Coagulation may proceed in the form of aggregates shaped by particle coalescence and aggregate flake-like sedimentation or gel, a solid coagulation structure. The rate of coagulation may be calculated by the equation:

dn / dt = K · n 2 , (8)

given that,
n - a number of particles per volume unit;
K - coagulation constant.

The coagulation constant of spherical particles of various values is defined by the formula:

, (9)

given that,
r 1 , r 2 - radius of coagulating particles;
A - number factor depending on the properties of particle surface;
L - length of particle's free run;
k - Boltzmann's constant;
T - absolute temperature.

The equation analysis shows that K grows significantly as the particle radius ratio goes up. This is why the particles vanish rapidly in heavily polydispersed medium.

The coalescence of particles suspended in the water hinges upon the rate of hydration and the value ofelectrokinetic potential on the surface of particles.

The coagulation of particles depends immensely on the wetting changes of their hard surface, which are caused by magnetic field.

Magnetic treatment of water affects its wetting capacity of solid surfaces owing to changed interaction patterns of water molecules as it has been mentioned before. This "pushes" the water molecules off the surface. The benefits of water magnetic treatment are also attributive to altered adsorption of individual ions on the surface. Therefore, the surface charge undergoes changes too.

Improved wetting of hard surfaces after magnetic treatment of water enhances coagulation of suspended particles and increases aggregate instability of suspensions.

The findings of amplified aggregate suspension instability resulted from magnetic treatment are in perfect harmony with the data on adhesion enhancement of solid particles in condensed systems (sediments).

The formation of easy-to-precipitate floes with developed surfaces within the shortest possible time is of special interest to the water treatment practice. Such flakes ensure quick separation of heterogeneous systems. One of the commonly used technological methods to intensify the coagulation for water treatment is injection of chemical agents such as active silicic acid into the clarified water. However, in many cases it entails considerable consumption of the reactant. At the same time, the coagulant activity may be remarkably strengthened when treating the water solution of coagulant by magnetic field. In this case, it can be inferred from the mechanism of magnetic field impact on aqueous solutions that ionic salt associations are raised in the coagulant solution due to weakened ion hydration and some other factors caused by the positioning of outside magnetic field. Ionic associates existing in the aqueous solution may work as coagulation centres.

Ferromagnetic particles (iron ions) always present in different numbers in the treated water can have a certain influence on crystallization during magnetic water treatment. The research has shown that during magnetic treatment of water, aggregation of ferromagnetic particles emerges and accelerates the crystallization. In addition, the agglomerates of ferromagnetic particles get a coating of calcium carbonate, which can also become a crystallization centre.

Any method of water treatment pursues the general object of isolating insoluble contaminants through coalescence and fusion. The sedimentation of species is regarded as a mass process that changes in time.

Qualitative and quantitative indicators of sedimentation are greatly determined by the process kinetics, which imply the nature of velocity changes and the mechanism for separation of particles in time.

Fig. 2.

With a considerably lengthy sedimentation time, the separation zones do not vanish completely. This can be attributed to statistical factors and, primarily, collisions of particles, flow discontinuity along them, etc. Hence, the pattern for fraction distribution of various density is of statistical nature.

Wastewater is a relatively rough suspension, which contains fine and colloidal species. The water contains dissolved electrolytes and, therefore, suspended fine particles carry same electric charges that repel one another, Fine colloidal particles suspended in the water are on the constant move and resemble the Brownian motion.

Several zones emerge some time later following the start of solid sedimentation in the wastewater (Fig. 2).

The lower part has the sediments of large particles that settle in the first place at the highest rate of precipitation.

Zone 4 houses a stratum of thickened sediments with particles situated at the closest range to one another, which stops any further sedimentation. The pressure of the above-lying strata continuously compresses this section. It should be noted that part of water is gradually squeezed upwards, which makes it possible to consolidate the given layer.

Zone 3 is a transition sector. Here the particles are steadily thickened in a downward direction. Zone 2 has the water with fine-dispersed suspensions. This water is very similar to the source wastewater in terms of composition without large species, which have settled before. Finally, Zone 1 contains clarified water.

According to the above-mentioned information, compounds and ions present in the water have certain magnetic properties characterized by magnetic susceptibility that defines the capacity of ions and compounds to change their magnetic moment once magnetic field is applied from outside. Augmentation of magnetic susceptibility will enhance the magnetization of particles, induced moment and will, ultimately, better interaction between the particles. Such a process intensifies the coagulation of particles in Zone 3, which will consequently consolidate the species in Zone 4 and press additional clarified water out to Zone 1.

Operational experience of magnetic systems at various sewage plants has shown that the quantity of quickly settling particles (Im/s and above) during magnetic treatment nearly doubles. Likewise, the concentration of sediments in the suspended layer advances by 1.2-1.5 times. This will allow the convenience of increasing the capacity of sewage facilities.

2. Feasibility Studies for Adaptation of Magnetic Technologies at IndahWater Pilot Plants in Malaysia

According to the information submitted by IndahWater, it is understood that all Malaysian sewage plants fall into 4 categories:
1. Communal Septic Tanks (CST).
2. Imhoff Tanks (IT).
3. Oxidation Ponds with Pump Station (OPPS).
4. Extended Aeration Plants (EA).

Based on the available papers, it can be concluded that the diversity of sewage plants in Malaysia calls for individual technical solutions to customize and adapt magnetic systems to the existing facilities.

2.1. Communal Septic Tank

CST is a two-chamber settler with horizontal hydraulic flow. In the first chamber solids from the incoming sewage settle to the bottom and form a "sludge blanket". This necessitates magnetic treatment of the sewage water as early as at the first stage. The magnetic application will intensify the separation process of a heterogeneous system such as the wastewater. The partially clarified sewage proceeds to the second chamber for further sedimentation where it also should be exposed to magnetic treatment. This will facilitate coalescence and flocculation of the particles present in the water and will shorten the formation period of large flakes, which precipitate with ease. Finally, dissolved solids will also settle due to accelerated crystallization.

Thus, the magnetic techniques will secure a higher purity treatment of the wastewater, which will inevitably lower both the biological oxygen demand and total dissolved solids by 50-60% and 35-40%, respectively.

However, installation of magnetic systems online at the inlet to the CST is not expedient, for the sewage water entering the CST does not go through mechanical treatment. Therefore, it will be necessary to frequently remove the systems for cleaning, which will considerably push up the operational expenses and depreciate the operational safety of the CST. In the light of these challenges, the following options are the most acceptable for magnetic treatment of the incoming CST wastewater:
1. Installation of magnetic systems on the centralized water supply pipeline inlet of a residential house to treat the flow in passing (Fig. 3).
2. Installation of strap-on magnetic systems on the sewage outlet pipe of every residential house (Fig. 3).

Implementation of the first scheme will produce the results that are presented below:

  • the operational lifetime of housing pipelines is extended by 2-3 times due to significant reduction of deposit build-ups,
  • a corrosive action of the sewage water on the iron slides down by 30-50%. That will prolong the service life time of housing pipelines,
  • the probability of clogging sewer pipes declines because of better solubility of the magnetized water,
  • collection of fine fractions improves by 15-25%,
  • the rate of sludge sedimentation in the second CST chamber accelerates by 25%,
  • the rate of suspension settlement inside the CST goes up by 1.4-2.6 times
  • there is a 28-60% reduction of the suspended solids in the water on the CST outlet.

Almost the same advantages except for the first three will be obtained when carrying out the activities related to the second option.

To sum up, the first choice is the most attractive one for a complex approach towards the sewage problem.

sewage water system
Fig. 3.

2.2. Imhoff Tank

The IT design provides for installation of a slot magnetic system at IT entrance (Fig. 4).

The following benefits can be secured:

  • the rate of solid sedimentation accelerates by 1.5-2 times,
  • collection of fine fractions improves by an average of 20%,
  • dissolved solids in the clarified water decrease by 15-25%,
  • biological oxygen demand goes down by 10-15%,
  • sludge digestion time reduces by 30%,
  • the probability of blocking the tank filter drops nearly two-fold.

2.3. Oxidation Pond with Pump Station

According to the charts attached to your technical papers, the sewage water undergoes mechanical treatment and then is pumped to the sedimentation cell via the Parshall flume. Partially clarified water moves to a system that comprises oxidation ponds to reduce the organic matter and pathogenic bacteria. However, the efficiency of such a pattern for wastewater treatment is essentially dependent upon climatic surroundings and weather conditions.

To lessen the dependency, it is necessary to diminish the organics that proceed with the water to the ponds. Towards this end, magnetic aeration of the water flow to the Parshall flume is required, on the one hand, and special magnetic field needs to be applied to the water flow passing through a narrow cross-section of the flume, on the other (Fig. 5).

Magnetic aeration of the water stream will substantially enhance floatation and once combined with magnetic treatment of the water in the flume will greatly improve the isolation of organic substances from the water in the sedimentation cell. The complex treatment is also likely to immensely reduce the pathogens in the ponds.

Any further reduction of the organic matter comes about in the first pond by way of aerobic fermentation. Fermentation is known to imply chemical reactions fuelled by certain microorganisms including bacteria with their vital role in the process. The bacteria affect impurities, which work as a nutritional medium. Synthesized bacteria sustain chemical reactions and serve as catalysts for them. Thus, the fermentation process is based on building a bacterial culture. The growth of bacteria slows down once the conditions turn unfavourable. One of the main reasons for growth inhibition or cessation is accumulation of toxic metabolic products or environmental changes. Magnetic treatment alters the water structure and, therefore, maintains best conditions for the removal of hydrogen sulphide and CO 2 from the water. This will appreciably curtail the digestion time for the organic matter.

Heading from this, the suggested technical solution will secure the following results:

  • the rate of solid sedimentation accelerates by 1.5-2 times,
  • fermentation period oforganics dwindles roughly by 30%,
  • dissolved solids in the water go down by an average of 20%,
  • biological oxygen demand lowers by 10-15%,
  • consolidation of sediments and the dry substance output advances by 5-6%,
  • pathogens decline approximately by 10 times.

Application of magnetic technologies at oxidation ponds with pump stations makes it possible to increase the productive throughput by 40%.

2.4. Extended Aeration Plant

An extended aeration plant is a typical sewage facility to treat wastewater and consists of a primary treatment section, an aeration tank, a sludge-settling tank with sludge recirculation system, an aerobic digestion tank and a sludge holding tank.

To achieve the ultimate goal, i.e. reduction of dissolved solids in the treated sewage water as well as the biological oxygen demand, it is necessary to install magnetic systems at the following points (Fig. 6):

1. Before aeration tank

To intensify floatation through consolidation of air bubbles in the magnetic field with subsequent particle coalescence.

2. Before sludge settling tank

To additionally enhance destabilization of the water dispersed system, which will speed up flocculation and, therefore, almost halve the sedimentation time with a subsequent 5-6% increase in the dry matter output.

3. Before aerobic digestion tank

To quicken the growth of bacterial culture, which will shorten the fermentation time nearly by 1.4 times.

4. Before sludge holding tank

To intensify the phase separation or, namely, accelerate the sludge dewatering process.

Taking into account the above-mentioned improvements, complex installation of our systems will allow the convenience of the benefits as specified below:

  • reduction of dissolved solids by 15-17%,
  • a drop in the biological oxygen demand by 8-10%,
  • an increase in the capacity by 30-65%.

The proposed adaptation of magnetic systems will entail one-time payment with no additional electricity expenses. Another important thing about the systems is that they are maintenance-free.

3. Magnetic Systems for Water Treatment at IndahWater Sewage Plants

A thorough analysis of the Malaysian sewage plants based on your engineering specifications has shown that the Communal Septic Tank is the hardest part for magnetic treatment of the wastewater for the reason of technical implementation. Nonetheless, a complex approach, as we have mentioned before, which includes installation of magnetic systems on the central water supply pipe of residential houses will make it possible to solve the main problem and will substantially extend the operational lifetime ofexisting pipelines.

Below is given an outer tracing of the three proposed magnetic devices. All the units for the aforesaid purpose will have a similar design with flanges, which can be made to fit the diameters at installation points (Fig. 7).

The table below includes the specification details of the three magnetic systems.

# Description Unit System#1 System#2 System#3
1 Unit code - Ut-1 Ut-2 Ut-3
2 Flange inside diameter mm 250 100 50
3 Unit length mm 500-700 500-700 500-700
4 Pressure limit bar 6 6 6
5 Flow capacity m 3 /hr 180 40 28
6 Temperature limit °C 90 90 90

The detailed sketches of magnetic systems suggested for installation at the CST, Imhoff tank, oxidation pond and extended aeration plant are shown in Fig. 8, 9, 10, 11.

# Place of Installation Qty. A, mm B, mm C, mm D, mm
1 After Pump Station (with flange) 2 500 50 500 250
2 After Aeration Tank (with flange) 2 500 50 500 250
3 After Settling Tank 1 120 40 500 112.5
4 After Sludge Digester Tank 1 350 50 500 175

4. Warranty

Magnetic Technologies L.L.C. guarantees to provide full-service and necessary replacement of equipment due to technical faults for the duration of 18 months from the date of commissioning. The probability of trouble-free operation is 0.999973.

No side or negative effects are associated with magnetic treatment of water.

5. Monitoring System

Both parties should undertake operational efficiency monitoring of the systems according to the following procedure.
1. Make at least 20 tests of TDS (mg/l) and BOD (mg/1) at the discharge point of each sewage facility prior to installation of magnetic systems.
2. Define average values of the measured parameters.
3. Compile a joint report on the results obtained.
4. Follow Step 1 and Step 2 after installation of magnetic systems.
5. Compute the operational efficiency of magnetic systems by the formula:

E = (K 0 - K m ) x 100% / K 0

given that,
E - operational efficiency of magnetic systems,
K o - an average value of TDS or BOD before installation of magnetic systems,
K m - an average value of TDS or BOD after installation of magnetic systems,
In case of significant fluctuations in weather conditions before and after installation of magnetic systems the formula-computed value shall be divided by the empirical factor of O.85.

6. Conclusion

The technical proposal presented herein includes brief information on enhancement of natural and wastewater treatment and describes the mechanism of magnetic field effects on the condition of water dispersed systems. This will enable the customer to visualize near and long-term outlook.

A self-contained design of individual systems ensures highly reliable functioning with the trouble-free operation probability being 0.999973. The feasibility study for adaptation of magnetic systems and guaranteed designs serve as an indication of viability and capacity of the given proposal to make IndahWater the first major enterprise in Malaysia to capitalize on the latest magnetic technologies.

Our experience and expertise in implementation of similar projects is underpinned by efficient functioning of our systems at sewage plants in various regions of the erstwhile Soviet Union and by the results of experiments carried out at the sewage plants in Dubai, United Arab Emirates and Cairo, Egypt. There is a multitude of sewage facilities in the C.I.S. that have availed themselves of magnetic systems. This is just to name a few:

  1. Sewage Plant in Kharkov, Ukraine.
  2. Sewage Plant at the Phosphorite Factory in Bryansk, Russia.
  3. Heat Power Station in Polotsk, Belarus.
  4. Heat Power Station in Togliatti, Russia.
  5. Sewage Plant in Kramatorsk, Ukraine.
  6. Sewage Plant in Cherkassy, Ukraine.
  7. Sewage Plant in Dnepropetrovsk (Lomovsk district), Ukraine.
  8. Sewage Plant in Aulsk Ukraine.
  9. Sewage Plant in Belaya Tserkov, Ukraine.

7. Recommendations of Magnetic Technologies L.L.C. Commission of Experts

Taking into consideration the particularities of sewage plants in your country such as a great number, low technological level and a scattered nature of sparsely populated areas, we believe that our proposal embodies the most expedient one from the engineering, economical and medical standpoint. It involves installation of magnetic systems on all main pipelines, which feed drinking and industrial water to dwelling houses and industrial enterprises alike.

Our equipment will dramatically change the ecological situation at large and will significantly reduce the population morbidity rate. So, it will help you solve the problems that you are facing on an every day scale.

Furthermore, the method presented herein is the most economical and inexpensive without peer among all the currently available solving models.

Attached are some decrees passed by the Healthcare Ministry of the former Soviet Union, which dwell on the effects that magnetic water has on the human body.